1 procedure for scanning to a server, 1 using the automatic document feeder, How to use the automatic document feeder – Konica Minolta bizhub 160 User Manual

Page 110: Procedure for scanning to a server -3

Advertising
background image

Using scan to server (FTP) operations

5

SU-502

5-3

Us

in

g s

c

a

n

to

s

e

rv

e

r (

F

T

P

) o

per

at

ion

s

Cha

p

ter 5

5.1

Procedure for scanning to a server

5.1.1

Using the automatic document feeder

How to use the automatic document feeder

1

Press the [Scan] key.

The machine switches to scan mode,
and the scan screen appears.

2

Place the document to be scanned in
the automatic document feeder.

Adjust the guides to the size of
the document.

Load the document with the sur-
face to be scanned face up.

3

Press the [Speed Dial] key, and then
use the 10-key pad to enter the 3-
digit speed dial number programmed
with the FTP server address where
you want to upload the scan data.

Specify a speed dial number be-
tween “201” and “210”.

An FTP server address can only
be specified with a speed dial
number. In addition, the FTP
server addresses are registered
for a speed dial number using PageScope Web Connection. For
details, refer to “Specifying the setting for speed dialing (FTP serv-
er)” on page 3-51.

If you make a mistake, press the [No/C] key, and then enter the cor-
rect number.

Advertising
This manual is related to the following products: