Konica Minolta magicolor 7450 grafx - Manual (Page 211)

Configuring the Printer 193
Paper Source The paper tray that is normally used can be speci-
fied.
Choices: Tray1, Tray2, Tray3, Tray4, Tray5
Default: Tray2
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE -
DEFAULT TRAY
Duplex If Long-Edge Binding is selected, the pages will be
printed on both sides of the paper for long-edge
binding.
If Short-Edge Binding is selected, the pages will be
printed on both sides of the paper for short-edge
binding.
Choices: Off, Short-Edge Binding, Long-Edge
Binding
Default: Off
Configuration Menu Equivalent:
PAPER MENU - DUPLEX
This menu item appears only if the optional duplex
unit is installed.
Output Tray Displays the name of the output tray.
Copies Specifies the default setting for number of copies to
be printed.
Range: 1-9999
Default: 1
Configuration Menu Equivalent:
PAPER MENU - COPIES
Paper Size Specifies the default setting for the size of paper.
Width Specifies the paper width when Paper Size is set to
Custom.
Range: 3.55 - 12.25 (inch) / 90 - 311 (mm)
Length Specifies the paper length when PAPER SIZE is set
to Custom.
Range: 5.50 - 47.24 (inch) / 140 - 1200 (mm)
Item Description