Konica Minolta bizhub 200 - Manual (Page 7)

Changing the Display 7
Using the Display Grid
The Display Grid is a function used for positioning and
measuring size when creating objects.
The intervals of the Display Grid can be changed.
Additionally, objects can be positioned according to the
grid.
Display/Hide the Display Grid
Switching between displaying/hiding the Display Grid.
When the Display Grid is not shown, select
[View]
→[Display Grid].
3
The Display Grid will be shown.
• If this operation is performed when the Display
Grid is being shown, it will hide it.
Changing the intervals of the grid
Changing the intervals of the Calibration Sheet grid.
■ Grid Interval
– 20 dots
– 40 dots
– 60 dots
– 80 dots
• The initial value is “40 dots”.
The interval will be changed to 60 dots.
Note
• This operation cannot be done when the Calibration
Sheet is not being displayed.
Select [View] →[Grid Interval]→[60 dots].
3
The interval of the grid will become 60 dots.