Konica Minolta BIZHUB C252 - Manual (Page 49)

2 Using copy functions
2-12 C252
Using copy f
unct
ions
Chapter 2
2.4 Specifying a Zoom setting
The zoom ratio can be set in order to make a copy on
paper with a size different than the document or to
enlarge or reduce the size of the copy image.
The zoom ratio can be specified in any of the following
ways.
Setting Description
Auto Zoom
*1
The most appropriate zoom ratio is
automatically selected based on the size of
the loaded document and the specified
paper size.
Full size (“×1.0”) A copy that is the same size as the document
(×1.000) is produced.
Enlarge settings The most suitable enlargement zoom ratios
for copying from common standard
document sizes to standard paper sizes are
preset.
Reduce
settings
*2
The most suitable reduction zoom ratios for
copying from common standard document
sizes to standard paper sizes are preset.
Set Zoom
*2*3
Programmed zoom ratios can be recalled to
be used again for copying.
XY Zoom By using the keypad, a zoom ratio between
×0.250 and ×4.000 can be typed in directly
without changing the height-to-width ratio.