Konica Minolta BIZHUB C252 - Manual (Page 68)

Using copy functions 2
C252 2-31
Using copy f
unct
ions
Chapter 2
2.10 Selecting Fold & Staple settings
The paper that is fed out can be folded in half and
stapled at two places along the center.
The “Fold & Staple” setting is available when the saddle
stitcher is installed on optional finisher FS-514 or if
finisher FS-603 is installed. The “Fold” setting is
available when the saddle stitcher is installed on
optional finisher FS-514.
The following procedure describes how to specify Fold
& Staple settings.
To bind paper at the center (Fold & Staple settings):
Finisher FS-514
1
In the Basic screen, touch [Fold & Staple].
The Fold & Staple screen appears.