Konica Minolta PageScope Data Administrator - Manual (Page 34)

How to Use the PageScope Data Administrator 3
PageScope Data Administrator 3-25
Set Search Range
1
From the “Import from device screen,” click [Search settings].
The Device search settings screen is displayed.
2
Set the search range, click [Add].
– SNMP community name: Input the SNMP community name.
– Start IP: Input the start IP address of the search range.
– End IP: Input the end IP address of the search range.
– Add: Add a search range for devices.
– Delete:
Delete a search range for devices. Select the search range to delete
from the list, and click [Delete].
3
Click [OK].