1 specifying the log setting, Specifying the log setting -4 – Konica Minolta PageScope Direct Print User Manual
Page 51
Advertising
Checking the Printing Status and Print Log
9
PageScope Direct Print
9-4
9.2.1
Specifying the log setting
The maximum amount of log data that is saved can be set.
Operating procedure
1
In the main window, click the [Log View] button.
The List of Log dialog box appears.
2
Click the [Log Settings] button.
The Log Settings dialog box appears.
3
Specify the log capacity.
H
A setting between 0 and 1,000 MB can be specified, however, a
capacity larger than the size of the computer's hard disk cannot be
specified.
4
Click the [OK] button.
Note
The default setting for “Log Capacity” is 0 MB. When “Log Capacity” is
set 0 MB, only the last log is saved. To save previous logs, specify an
appropriate setting for “Log Capacity”.
Advertising