Konica Minolta bizhub PRESS C1100 User Manual
Page 69
Advertising
5-24
bizhub PRESS C1100/C1085
5
R
Check the calibration data
measurement result using the graph
displayed in the [Density Output] area.
To change and check the contents of the graph
displayed in the [Density Output] area, adjust
the check boxes on the right-hand side.
S
To execute calibration several times, repeat procedures 5 to 18.
T
Click [Close] to exit calibration.
Tips
To view the previous calibration setting, select [Check the Status].
Advertising
This manual is related to the following products: