Konica Minolta bizhub PRESS C1100 - Manual (Page 27)

3-8
bizhub PRESS C1100/C1085
3
) Default setting
Check that optional information of this machine is configured correctly on the printer driver.
0 If optional information of this machine is not configured correctly on the printer driver, you cannot use optional
functions. If any optional function is mounted, be sure to configure a setting.
A
Select a print command of the application, then select the required printer name from
[Print].
B
Select [bizhub PRESS C1100/C1085PS]
from the pull-down list in the window,
then click [Settings].
C
Click on the upper-right corner of
the window, then click [Configure] that is
displayed.
Check that is shown on the right-hand side
of [Acquire Device Information]. If this mark is not
shown, click [Acquire Device Information] to
acquire device option information.
NOTICE
NOTICE
If you have failed to acquire device option information,
check the network setting.
D
Click [OK].
The device option information setting is then completed.