Konica Minolta bizhub PRO C500 - Manual (Page 5)

5
Start / Exit Fiery Remote Scan
● Start Fiery Remote Scan
To start up the Fiery Remote Scan, perform the following.
1.
From the task bar on your PC, Select
[Start], [Program], then [Fiery]. Click
[Fiery Remote Scan 5].
2.
The Fiery Remote Scan will run.
On the first-time starts up, the following window appears.
The print controller must be registered on this window
before starting to use the Fiery Remote Scan.
"Register Device"(page 7)
● Exit Fiery Remote Scan
To exit the Fiery Remote Scan, perform the following.
To exit from the device setup window:
1.
On the Fiery Remote Scan device setup
window, click [Cancel].
The Fiery Remote Scan exits.
To exit from the basic window:
1.
On the Fiery Remote Scan basic win-
dow, click [Close].
The Fiery Remote Scan exits.
Reference