9 fax completion tone volume setting, Fax completion tone volume setting -29 – Konica Minolta FK-502 User Manual
Page 58
Advertising
Before Use
2
bizhub 750/600
2-29
Be
fo
re
Us
e
Chapter 2
2.9
Fax Completion Tone Volume Setting
The volume of the buzzer that sounds at the end of the fax communication
can be adjusted.
Available value : 0 to 16 (Default value : 8)
1
Press [Accessibility] on the control panel to open the Accessibility
Setting screen.
2
Press [Sound Setting].
3
Press [Fax Completion Tone Volume Setting].
4
Press the [Lower] or [Higher] to adjust the sound volume, and then
press [OK].
Advertising
This manual is related to the following products: