Konica Minolta FK-502 - Manual (Page 132)

Troubleshooting 5
bizhub 750/600 5-5
T
rou
ble
s
h
oot
in
g
Chap
te
r 5
5.3 Error Message Displayed
When a problem occurs with the FK-502, the following error messages are
displayed in the screen. Take corrective actions by referring to the
explanation. If the document still cannot be sent properly even after
attempting to correct the problem, please contact your service
representative.
Error Message Corrective Action
Busy Although the set number of redials were attempted, the receiving
machine was busy. Resend after confirming the status of the re-
ceiving machine.
No Answer This indicates a state in which the machine is unable to receive.
Telephone the receiving destination, confirm the status and then
try resending the document.
Memory full • When the memory becomes full reading the document:
To transmit the document which was read, press the [Start] or
press the [Stop] to discontinue the transmission.