20 sending after the check of destination, Sending after the check of destination -53 – Konica Minolta FK-502 User Manual

Page 190

Advertising
background image

Transmission Applications

7

bizhub 750/600

7-53

Tr

ansmission

Ap

plicat

ion

s

Chapter 7

7.20

Sending after the check of destination

When you specify the destination and press the [Start] button, the Check
Destination screen and the number of cases appear. Sending after the
destination check prevents erroneous transmission due to incorrect
destination.

!

Detail

To use the Destination Check Display function, you should set the
Destination Check Display function to ON at the time of the Function
ON/OFF Setting. Refer to page 11-36 for more information on the setting
of the Destination Check Display function.

1

Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.

2

Set [Scan Setting], [Comm. Setting] if necessary.

3

Designate the destination.

See "Selecting One Destination" on page 3-19 for information
about designating the destination.

4

Set the original document.

See "Placing Originals on the Platen Glass" on page 3-6 for
information about setting the document.

5

Press [Start].

Check Destination screen appears.

6

Check that a correct destination is specified and press the [TX] or
[Start] button.

Advertising
This manual is related to the following products: