Konica Minolta FK-502 - Manual (Page 208)

Polling 9
bizhub 750/600 9-7
Polling
Chapter 9
9.3 Bulletin
The FK-502 enables you to browse the bulletin board of a destination for
documents designated for polled transmission or polling reception. This
section includes procedures for working with documents on the bulletin
board of a destination. Procedures include writing a document to the bulletin
board, or receiving, by polling the document written on the bulletin board.
9.3.1 Write a Document to the Bulletin Board
Perform the following procedure to write a document on a Bulletin board.
Write a Document to the Bulletin Board
0 Specifications
The Bulletin boards must be defined in advance. See "Setting the Bulletin
Board" on page 10-50.
Bulletin boards can be used only when the destination incorporates the
F-code feature.
You can save only one document to a Bulletin board.
0 Functions incompatible
Frame Erase, Scan Size, Mixed Original, Z-Folded Original, Long Original,
Bind Position, Polling TX (Normal), Overseas TX, ECM OFF, Password
TX, F-Code TX, V.34 OFF, Separate Scan
0 If a document is already saved to the Bulletin board, the new one will
overwrite the existing document.
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Press [Comm. Setting].
Browse
Write
Bulletin boards
Polling