Konica Minolta FK-502 - Manual (Page 310)

Utility Mode 11
bizhub 750/600 11-41
Utility Mode
Ch
ap
te
r 11
11.12.3Closed Network RX
The closed area reception function can be enabled or disabled.
When set to ON, set the password used for the Closed Network RX by 4
digits.
Closed area reception means that your FK-502 will receive the incoming data
only when the sender's password is valid. The FK-502 checks if the sender's
password is equal to that defined for your FK-502. If the two passwords are
different or the sender does not provide a password, a communication error
results.
*
indicates factory default setting.
Setting up closed network area reception
0 Functions incompatible with closed area reception
The use of this function is available only when the machine on the other
end is provided with the Password Transmission function.
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).
2
Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
Item Description Available value
Closed Net-
work RX The closed area reception is the
function used to receive the incom-
ing data only when the sender's
password is valid. ON / OFF
*
The password is a number
of up to 4 digits.