Konica Minolta bizhub C650 - Manual (Page 80)

C650 2-65
Administrator Operations 2
Adm
inist
rat
o
r Op
era
tions
Chapter 2
12
A message will appear that confirms whether the HDD may be formatted or not.
Select the [Yes] and touch [OK].
? What happens when HDD Format is executed?
% Executing HDD Format erases data in the HDD. It is recommended that important data be saved in
a backup medium in advance. Execution of HDD Format will also reset the setting values of different
functions to the default values. Set the Enhanced Security Mode to [ON] again. For the functions
whose settings are reset to the default values, see "Items cleared by HDD Format" on page 2-10.
13
Make sure that a message appears prompting you to turn OFF and then ON the main power switch.
Now, turn OFF and then turn ON the main power switch.
– To make the setting of [Encryption Priority] or [Overwrite Priority], go to step 14.
? What is the difference between Encryption Priority and Overwrite Priority?
% [Encryption Priority] refers to writing of data in HDD with an enhanced encryption strength. It is
recommended that [Encryption Priority] be selected to achieve a greater effect of encryption.
% [Overwrite Priority] refers to writing of data in HDD through the standard encryption technique.
% [Encryption Priority] is the default setting.
14
Call the HDD Settings menu to the screen from the control panel.
– For the procedure to call the HDD Settings menu to the screen, see step 1 of "Setting the HDD Lock
Password" on page 2-56.