Konica Minolta bizhub C650 - Manual (Page 43)

2 Using copy functions
2-14 C650
Usin
g co
py fu
nct
ions
Chapter 2
3
Touch the button for the desired settings, and then touch [OK].
– If “1 > 2” or “2 > 2” is selected, touch [Output Bind Direction], select the
binding position for the copy, and then touch [OK].
– If “Auto” is selected, the binding position is set at the top or on the left
side. The binding position is automatically determined according to the
orientation of the loaded document. If the document length is 11-11/16
inch (297 mm) or less, a binding position along the long side of the paper
is selected. If the document length is more than 11-11/16 inch (297 mm),
a binding position along the short side of the paper is selected.
4
Touch [Close].
The Basic screen appears again.