Konica Minolta bizhub C650 - Manual (Page 102)

C650 3-29
Using fax/scan functions 3
Usin
g fa
x/s
c
an
f
u
n
c
ti
on
s
Chap
te
r 3
3
Select the desired size and orientation.
– If a button other than [Auto] was touched, select the desired paper size,
and then touch [OK].
4
Touch [OK], and then touch [OK] in the next screen that appears.
Otherwise, touch [Main Screen].
Original Settings
Select the binding position and orientation of the document.
These functions can be used together.
Parameter Description
Original Direction Select the orientation of the document. After the document is
scanned, the data is processed so that it is correctly oriented.
For details on selecting the document orientation, refer to
"Selecting the document orientation (Original Direction settings)"
on page 1-18.
Binding Position Select the binding position, for example, when holes are
punched in the document or the document is stapled. In addition,
specify the binding position when a double-sided document is
loaded.
This adjusts the scan of double-sided documents so that the
binding position is not reversed.
Left: Select this setting for a document with a binding margin on
the left side.
Top: Select this setting for a document with a binding margin at
the top.
Auto: The binding margin is on the long side if the page is 11-11/
16 inch (297 mm) or less, or it is on the short side if the page is
more than 11-11/16 inch (297 mm).