Konica Minolta bizhub C650 - Manual (Page 20)

C650 1-13
Before use 1
Be
fo
re
u
s
e
Chapter 1
Placing the document on the original glass
1
Lift open the ADF.
– When placing the document on the original glass, be sure to lift open the
ADF at least 20°. If the document is placed on the original glass without
the ADF being lifted at least 20°, the correct document size will not be
detected.
2
Place the original on the original glass with the side to be scanned
faces down.
– Load the original pages so that the top of the original is toward the back
or the left side of the machine.
3
Align the document with the mark in the back-left corner of the
document scales.
4
Close the ADF.
When loaded in the v orientation: When loaded in the w orientation:
20° 20°
Document scales