Konica Minolta bizhub C650 - Manual (Page 50)

C650 2-21
Using copy functions 2
Usin
g co
py fu
nct
ions
Chapter 2
When the “2 Position” Staple setting is selected
5
Touch [OK], and then touch [OK] in the next two screens that appear.
Otherwise, touch [Main Screen].
The Basic screen appears again.
2
Note
The number of punched holes differs depending on the country (region) where the
unit is installed. For details, consult your technical representative.
Selecting a folding or binding setting
1
In the Basic screen, touch [Finishing].