Konica Minolta bizhub C35 - Manual (Page 59)

Useful transmission functions (G3 fax) 3-14
Useful transmission functions (G3 fax)
With [Comm. Method] in the [Comm. Settings] screen, useful transmission
functions can be specified.
"
For details on [Polling RX], refer to “Polling reception (G3 fax)” on
page 4-6.
[Timer TX]
A timer transmission can be specified.
Timer transmission is the function for sending a fax at a specified time. Multi-
ple destinations can be specified. A maximum of 16 timer transmissions
(including transmissions being redialed) can be queued.
To send a timer transmission, press [Yes], and then use the keypad to type in
the transmission time. The time can be set in hours and minutes. The day
cannot be specified.
"
In order to send a timer transmission, the date and time must first be
specified on the machine. For details on the date and time settings,
refer to the [Printer/Copier/Scanner User’s Guide].
"
This function cannot be used together with Internet fax transmissions
or polling reception.
"
If information was incorrectly entered, press the [C] key to erase the
entered information.
"
If the machine is off at the specified TX Start Time, the fax will be sent
the next time that the machine is turned on.
"
For details on canceling a queued transmission job, refer to “Cancel-
ing a queued transmission” on page 3-23.