Konica Minolta bizhub C35 - Manual (Page 68)

If the fax cannot be sent (automatic redialing) (G3 fax) 3-23
If the fax cannot be sent (automatic
redialing) (G3 fax)
If the fax could not be sent correctly, for example, if the line is busy or a com-
munication error occurred, a message appears, informing that the number
will be redialed after a certain length of time. A fax that could not be sent
becomes a queued transmission, and the machine automatically redials the
number after a certain length of time has passed.
If necessary, the number of redial attempts and the interval between them
can be specified. For details, refer to “[Comm. Settings]” on page 2-10.
"
Automatic redialing cannot be used if the fax is being sent manually.
"
For details on canceling a transmission being redialed, refer to “Can-
celing a queued transmission” on page 3-23.
"
For details on problems that may occur during transmission, refer to
“Problems when sending faxes” on page 8-2.
Canceling a queued transmission
To stop a queued G3 fax and Internet fax transmission or a G3 fax transmis-
sion queued for redialing, delete the job from the Job screen.
1
In the home screen, press [Job].
– For details on the home screen, refer to “Home screen” on page 1-6.
2
Press [Send].
A list of queued transmission jobs appears.
3
Select the job to be deleted, and then press [Delete].
4
Press [Yes], and then press [OK].
The job is deleted.
"
For details on the Job screen, refer to the [Printer/Copier/Scanner
User’s Guide].