Konica Minolta bizhub C35P - Manual (Page 336)

Configuring the Printer 7-117
TCP/IP
TCP/IP (shown above)
The Network - TCP/IP - TCP/IP window allows you to configure the following
items. For more information on these TCP/IP, see Chapter 6 “Network Print-
ing”
Item Description
TCP/IP Sets whether or not to use TCP/IP.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - ENABLE
Speed Specifies the operating mode and speed for Ethernet.
Choices: Auto, 10Base-T(Half), 10Base-T(Full),
100Base-TX(Half), 100Base-TX(Full),
1000Base-T(Full)
Default: Auto
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET -
SPEED/DUPLEX
LPD Select whether or not LPD is used.
Choices: Enable, Disable
Default: Enable
SLP Select whether or not SLP is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - SLP - ENABLE
LLMNR Select whether or not LLMNR is used.
Choices: Enable, Disable
Default: Enable
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.