Konica Minolta bizhub PRESS C6000 - Manual (Page 35)

bizhub PRESS C7000/C6000 2-28
2.4 Administrator Security Functions 2
6
Press [01 HDD Lock Password].
The HDD Lock Password Screen will be displayed.
7
Press [Current Password] to enter the password currently used, then press [OK].
(Default password: main body serial number consisting of 13 alphanumeric characters)
NOTICE
Do not use your name, birthday, employee number, etc. for a password that others can easily figure out.
% The main body serial number as 13 alphanumeric characters is displayed on the upper left corner
of the Utility Menu Screen or to be printed on the upper right corner of the audit log. For details, see
the next section "Printing Audit Log."
% The information on changing password will be saved in the audit log.
% The current password cannot be used again as a new password.
8
If the authentication has succeeded, press [New Password] to enter a new password.
% Be sure to use 8 or more alphanumeric characters for the password.
% Press [OK] when completed.
9
Press [Input Confirmation] to enter the same password as above.
% Be sure to use 8 or more alphanumeric characters for the password.
% Press [OK] when completed.
10
Press [OK] on the HDD Lock Password Screen.