Konica Minolta bizhub PRESS 1250 - Manual (Page 131)

Parameter Option Description
RGB source
profile Enables you to select an RGB source profile.
RGB
rendering
intent Provides the following options (for information on each option, see
the descriptions of the CMYK rendering intent options in this table):
● Auto
● Relative
● Absolute
● Saturation
● Perceptual
Adjustments Brightness Controls the brightness level for the job. The options range from
Lightest, which makes the job 15% lighter, to Darkest, which makes
the job 15% darker.
Brightness is generally used to make last-minute adjustments to the
job after proofing. By changing the Brightness setting, you can
control how light or dark your output appears.
Contrast Controls the difference between the light tones and the dark tones in
your image. The options range from Less, which makes the job 10%
lighter to More, which makes the job 10% darker. Contrast is
generally used to make last-minute adjustments to the job after
proofing. By adjusting the Contrast setting, you can control the
difference between the light tones and the dark tones in your image.
Gradation Contains a list of gradation tables that were created in the IC-309m
print controller Gradation Tool window. Each gradation table contains
specific settings for brightness and contrast.
In addition to the gradation tables created in the IC-309m print
controller, the following default gradation table is available:
● None—Applies maximum dry ink coverage. This is the default
setting.
When you select your predefined gradation table, your job is
adjusted according to the specific table's settings.
Monochrome tab in the job parameters window 123