Konica Minolta bizhub PRESS 1250 - Manual (Page 174)

9. Click Save, and then close the Remote JT window.
Note: When you edit and save Creo server job parameters settings from
within Prinergy, the settings are applied only to your current job and not
saved for future jobs.
10. From the Submit to Digital Print window, click Submit to send
the file to be processed and printed.
Note: Select Submit to Press Immediately, to send the file as soon as
you click Submit. Otherwise, the file will be sent at the scheduled time.
Printing from the Prinergy software
Requirements: The Prinergy software must be running.
1. In the Prinergy Job Manager window, in the Pages area,
select the job that you want to print, and drag it to the Loose
Page Proof template.
2. In the Start Process dialog box, select Edit Process
Template.
3. In the Loose Page Proof template dialog box, click the Include
JDF for Digital Print tab.
4. In the Device Selection list, select Creo Server.
5. In the PDF Path box, type \\<Creo server name>\<any
shared folder on the Creo server> .
Note: It is recommended that you use the JobUploads shared folder.
6. In the JDF Path box, type \\<Creo server name>\<any hot
folder on the Creo server> .
7. In the Select JDF Templates area, click Browse.
8. In the File Browser dialog box, select the required JDF file,
and click the Select <JDF_file_name> button.
9. Click OK.
10. In the Start Process dialog box, click OK.
The job is printed with the settings defined in the JDF file.
166 Chapter 11—Working with Creo server tools