Konica Minolta bizhub PRESS 1250 - Manual (Page 77)

IC-309m print controller automatically updates the imposition
settings in your job according to the selected imposition template.
In addition, when you create a template, the IC-309m print
controller publishes the list of imposition templates via JMF. Via
JDF, you can then select the desired imposition template by
specifying the imposition template name.
Creating an imposition template
Use the Imposition Template Builder to create an imposition
template. The Imposition Template Builder is available only with
the Action Pack.
The Imposition Template Builder tool enables you to select the
imposition method for which you want to create a template, and
then define all the parameters for the selected imposition method.
There are seven tab in the Imposition Template Builder, and the
options in each tab vary according to the imposition method
selected. A detailed list of all the available options can be found in
the section Imposition tab in the job parameters window.
1. From the Tools menu, select Imposition Template Builder.
The Imposition Template Builder appears and displays tabs
that enable you to define all of the required imposition
parameters for your new template.
Creating an imposition template 69