Start/exit command workstation, Start command workstation, Select a server to login – Konica Minolta bizhub PRO C500 User Manual
Page 8
8
Start/Exit Command WorkStation
Start Command WorkStation
Command WorkStation automatically starts up when the
computer is turned on. The following explains how to start
up the Command WorkStation again without restarting the
computer after exiting the Command WorkStation.
1.
From the task bar on your computer,
select [Start], [Programs], then [Fiery].
Click [Command WorkStation 4].
The Command WorkStation starts up.
At the first start-up, the following window appears.
Use an automatic search to add a server or input the
server name manually.
"Addition and removal of server" (page
Select a server to login
After starting up the Command WorkStation, the Login
Server window appears. The procedure to select a server
is as follows:
1.
Click the server name you want to
login.
The login window appears.
If the server name you want to login is not listed, click
[Add] to add the server.
"Addition and removal of server" (page
Reference
Reference