Konica Minolta bizhub PRO C500 - Manual (Page 17)

Main job control commands (Continued)
17
Holding of print job
How to change the job statuses that are displayed on the
Active Jobs Window or Printed Jobs Panel to "Spooled/
held" is explained below.
When a printed job is held, the selected job will be dupli-
cated to the Active Jobs Window and will be in [Spooled/
held] status. Therefore, the job can be printed again even if
the original job is deleted from the Printed Jobs Panel.
The only jobs that can be changed to [Hold] status
are [Waiting to process] and printed jobs.
1.
Right click the job on the Active Jobs
Window or Printed Jobs Panel to dis-
play the menu.
2.
Click [Hold].
The job will be displayed in light yellow and will be in
[Spooled/held] status.
In case of a printed job, the selected job will be dupli-
cated to the Active Jobs Window and become [Spooled/
held] status.
The job that was held with the job control command
[Hold] will be printed only when the [Print] command
is used.
Processing and holding of print job
How to change the job statuses that are displayed on the
Active Jobs Window or Printed Jobs Panel to "Processed/
held" after RIP processing is explained below.
When a printed job is held, the selected job will be dupli-
cated to the Active Jobs Window and will be in [Processed/
held] status. Therefore, the job can be printed again even if
the original job is deleted from the Printed Jobs Panel.
1.
Right click the job on the Active Jobs
Window or Printed Jobs Panel to dis-
play the menu.
2.
Click [Process and Hold].
The job will be displayed in yellow and will be in [Pro-
cessed/held] status.
In case of a printed job, the status will be changed to
[Processed/held] after the selected job is duplicated to
the Active Jobs Window and RIP processing is com-
pleted.
The job that was held with the job control command
[Process and Hold] will be printed only when the
[Print] command is used.
The RIP processed raster data remains in the Active
Jobs Window until it is removed even after the job that
was held with the job control command [Process and
Hold] is printed.
Administrator Operator
Administrator Operator