Konica Minolta bizhub PRO C500 - Manual (Page 7)

7
Setup of Command WorkStation
Before using the Command WorkStation, install the program
on your computer.
To install the Command WorkStation, the User Soft-
ware CD of the print controller is necessary.
1.
Turn on the computer to start up the
OS.
2.
Load the User Software CD onto the
CD-ROM drive.
3.
Open [CStation 4] folder on the User
Software CD and double-click
[Setup.exe].
The Setup wizard appears.
4.
Click [Next].
The license agreement window appears.
5.
Click [Yes].
Window for selecting where to install the software
appears.
6.
Check the directory to save the pro-
gram and click [Next].
Window for selecting a program folder appears.
7.
Check the program folder and then
click [Next].
8.
Select whether to create a shortcut key
in the start-up folder.
To create a shortcut key, click [Yes].
9.
Select whether to immediately reboot
the computer or not and click [Finish].
To use the Command WorkStation, the computer
must be rebooted after installing the program.