Login to the server, Exit command workstation – Konica Minolta bizhub PRO C500 User Manual
Page 9
Start/Exit Command WorkStation (Continued)
9
Login to the server
After selecting the login server, the login window appears.
The procedure to login as an operator is as follows:
1.
Click [Operator].
2.
Enter the password and then click [Log
in].
Login to the server completes and the main menu
appears.
When the computer that runs the Command Work-
Station is connected to the server, RAM of that com-
puter requires about 4MB per server. When
connecting with multiple servers, check the RAM
capacity of the computer.
To login multiple servers:
• Select [Server], [Login/Logout] to display the Login
Server window. Click on other server name and
then follow the same procedure as described
above.
To logout from a server after logging into multiple
servers:
• Select [Server], [Login/Logout] to display the Login
Server window. Click on the server name to
logout.
Exit Command WorkStation
To exit the Command WorkStation, perform the following.
1.
From the main menu, select [File] and
then [Exit] menu.
Command WorkStation can be also exited by clicking
the upper right close box.
The Command WorkStation exits.
Administrator
Operator
Guest