Konica Minolta magicolor 4750EN-4750DN - Manual (Page 148)

Specifying Printer Driver Settings 2-13
Paper Source Specifies the paper source as Tray 1, Tray 2,
Tray 3, Tray 1 (Manual Feed), or Auto.
„ The default setting is Tray 1.
Manually Print on 2nd side Select whether or not to print on the back
side of paper that has already been printed
on.
„ The default setting is Off.
Paper Sizes Specifies the paper size. An irregular paper
size cannot be selected.
Collate If On is selected, all pages in the documents
are printed as sets of printouts.
„ The default setting is Off.
Duplex Options Specifies the duplex print binding position as
Simplex, Long Edge, or Short Edge, if the
duplex unit for the printer has been installed.
„ The default setting is Simplex.
Select Color Specifies the color for printing as Color or
Grayscale.
„ The default setting is Color.
Color Separation Specifies the color separation as On or Off.
„ The default setting is Off.
Brightness Specifies the brightness of the image as
-15%, -10%, -5%, 0%, 5%, 10%, or 15%.
„ The default setting is 0%.
Edge Strength Set the edge strength to Off, Low, Middle or
High.
„ The default setting is Middle.
Economy Print Select whether or not economy printing is
used.
„ The default setting is Off.
Auto Trapping Select whether or not neighboring colors are
printed superimposed in order to prevent
white space around images.
„ The default setting is Off.
Parameters Settings