Konica Minolta magicolor 4750EN-4750DN - Manual (Page 215)

Network Printing 6-36
Installing the Driver When the Operating Systems of the
Server and Client Use a Different Number of Bits (With
Windows Server 2008 R2/Server 2008)
When Windows Server 2008 R2/Server 2008 is running on the print server or
when the operating systems running on the print server and client computer
use a different number of bits, the additional driver may not be installed cor-
rectly on the print server.
This can be corrected by specifying the setup information file (ntprint.inf) for
the operating system with the different number of bits while installing the addi-
tional driver on the print server.
The procedure for specifying the setup information file for a computer other
than the print server and installing the additional driver is described below.
"
From the print server, map the system drive of the client computer as
a network drive. The drive to be mapped must first be specified as a
shared drive.
Installing the Additional Driver
As an example, the following procedure describes the operations performed
when Windows Server 2008 (32 bits) is running on the print server and Win-
dows Vista (64 bits) is running on the client computer.
1
Specify the client computer (64 bits) drive installed with the operating sys-
tem (normally, drive C) as a shared drive.
"
This setting is available for only PostScript driver.