Konica Minolta bizhub 25e - Manual (Page 28)

Scan 2
2-8 bizhub 25e
2.2
4
Press <Start>.
% This step is not necessary when you have selected the
destination from the address book or shortcut.
% If the document was set on the document glass, "Set next
document." will be displayed once the scan has been
completed. Press [Complete] to complete the operation, or
set the next document on the document glass and press
[Next Doc].
2.2.2 Advanced scan settings
See the Scan and Fax Guide for more information.
Entering a file name
The default file name for scanned images is a 14-digit number consisting of the current year, month, day,
hour, minute, and second. ex.: 20120115143045.pdf.
You can customize the file name when scanning.
1
Switch the machine to scan mode.
2
Press [File Name].
3
Enter the file name, and press [Enter].
% Press [Delete] to clear the entered characters.
% Press [Upper] to switch the entry mode from lower case to
upper case, and [Symbol] to symbols, then [Lower] to low-
er case again.
% For more details on entering the characters, see chapter 2
in the Administrator’s Guide.
% You can also enter the file name using a file name regis-
tered in advance. For more details, see chapter 3 in the
Scan and Fax Guide.