Konica Minolta bizhub 25e - Manual (Page 15)

bizhub 25e 1-11
1.7 Loading paper 1
Setup the paper size
Setting the paper size that has been loaded into the bypass tray.
This operation is not required if you are loading the same size paper that was previously used in the bypass
tray.
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode>
repeatedly until My MFP Menu screen is displayed.
2
Press [Paper Settings].
3
Press [Bypass].
4
Select the paper size, and press [Enter].