Konica Minolta bizhub 25e - Manual (Page 26)

Scan 2
2-6 bizhub 25e
2.2
1
Set the document.
In the automatic document feeder
1. Set the document face up.
2. Align the document guides to the document width.
Open the platen cover
1. Set the document face down aligned with the back left corner.
2. Close the platen cover.
d
When you set a document on the document glass, be sure that there are no documents in the automatic doc-
ument feeder.
2
Switch the machine to scan mode.
% Press [Scan] from My MFP menu screen. Or, press
<Mode> repeatedly until scan ready screen is displayed.
d
To use the personal address book or shortcuts, log in to the machine. See chapter 2 in the Administrator’s
Guide.
3
Select the destination.