3 fax, 1 basic transmission, Prerequisite – Konica Minolta bizhub 25e User Manual
Page 30: In the automatic document feeder, On the document glass, Fax -10, Basic transmission -10
Fax
2
2-10
bizhub 25e
2.3
2.3
Fax
2.3.1
Basic transmission
See the Scan and Fax Guide for more information.
Prerequisite
To send and receive faxes, the following requirements must be met:
-
The telephone line cable has been connected to the machine and the wall outlet.
-
The machine has been setup for communication. For details, see chapter 8 in the Scan and Fax Guide.
1
Set the document.
In the automatic document feeder
1.
Set the document face up.
2.
Align the document guides to the document width.
On the document glass
1.
Open the platen cover.
2.
Set the document face down aligned with the back left corner.
3.
Close the platen cover.
d
When you set a document on the document glass, be sure that there are no documents in the automatic doc-
ument feeder.
2
Switch the machine to fax mode.
% Press [Fax] from My MFP menu screen. Or, press <Mode>
repeatedly until fax ready screen is displayed.