17 telephone line settings, Telephone line settings, 17 telephone line settings -49 – Konica Minolta bizhub 500 User Manual

Page 230

Advertising
background image

Utility Mode

10

Network Fax

10-49

Utility Mode

Chapter 10

10.17 Telephone Line Settings

For the IP address fax function, set the [Number of Redial] and the [Redial
Interval]. These are normally shared with the fax function.

Other items are not used for the IP Address Fax.

!

Detail

For the network fax function, set the [Number of Redial] and the [Redial
Interval]. For other items, see "User’s Guide (Facsimile Operations)".

*1

The setting value is different depending on the country.

*

indicates factory default setting.

Telephone Line Settings

1

Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).

2

Press [Fax Setting].

Some items may not be displayed depending on the optional
settings.

In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.

Item

Description

Available value

Number of Re-
dials

*1

Set the number of redials when no re-
sponse is available due to the other party
being busy.

0-7 (3 times

*

)

Redial Interval

Set the intervals between the redials.

1-15 (3 min.

*

)

Advertising
This manual is related to the following products: