Loading the original into the adf, Loading the original into the adf -3 – Konica Minolta bizhub C3350 User Manual

Page 35

Advertising
background image

[Introduction]

5-3

5.1

Loading the original into the ADF

5

Loading the original into the ADF

The ADF feeds original sheets one by one in order from the top, and automatically loads them. It also loads
a 2-sided original automatically.

The ADF is helpful when loading a large number of original.

1

Put the first page of an original at the top, and load the original into the Document Feed Tray with the
side to be photocopied facing upward.

% Load the original so that its top side is placed at the back. When loading in a different orientation,

be sure to specify the loading direction of originals.

NOTICE

Do not load more than 50 sheets at a time into Document Feed Tray, and do not load the sheets up to
the point where the top of the stack is higher than the

,

mark. Doing so may cause the originals to jam,

damage the originals and/or ADF failure. However, if the original contains more than 50 pages, it can be
scanned separately.

2

Slide the Document Guide to fit the loaded original.

Advertising
This manual is related to the following products: