Konica Minolta BIZHUB C252 - Manual (Page 28)

Administrator Operations 2
C252 2-9
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
Setting the Enhanced Security mode to [ON] changes the setting values of
the following functions.
Image Controller Setting Calls for setting made by the Service Engineer. For details, ask
your Service Representative.
Management Function
Choice
CE Password
CE Authentication
CS Remote Care
HDD
Settings to be Made in
Advance Description
Function Name Factory Setting When Enhanced Security mode is set to [ON]
Password Rules OFF ON (not to be changed)
Prohibit Function When
Auth. Error Mode 1 Mode 2 (not to be changed)
Three times is set.
* In association with Secure Document Access
Method, the method is changed from authenti-
cation using Secure Document ID and pass-
word (Mode 1) to that using the password with
the secure document first narrowed down by
Secure Document ID (Mode 2).
Public User Access Restrict Restrict (not to be changed)
User Name List OFF OFF (not to be changed)
Print Without Authenti-
cation Restrict Restrict (not to be changed)
User Box Admin. Setting Restrict Restrict (not to be changed)
SSL OFF ON (not to be changed)
FTP Server ON OFF (not to be changed)
SNMPv1/v2c Read/Write en-
abled Only Read is enabled (not to be changed)
SNMP v3 Security Level
and auth/priv-password auth/priv-pass-
word The security level can be selected from among
[auth-password] and [auth/priv-password].
An 8-digit-or-more auth-password and priv-
password can both be set.
Print Data Capture Allow Restrict (not to be changed)
Network Setting Clear Enabled Restrict
Incorrect User Box No.
Entry Print Print (Show Error Message can be changed, but
the function cannot be changed to Auto Create
User Box)
c252_security_E.book 9 ページ ２００７年４月１０日 火曜日 午後３時４５分