Konica Minolta bizhub C451 - Manual (Page 276)

Setting up the PPD driver (Mac OS X) 8
C451 8-18
2
Reminder
When printing a job that contains pages of different sizes and orientations
with the “Poster Mode” setting specified, images may be missing or over-
lapping when the document is printed.
The staple function is available only when the optional finisher is installed.
The hole punch function is available only when the punch kit is installed
on the optional finisher.
The fold & staple function and the fold function are available only when
optional finisher FS-608 or finisher FS-519 with saddle stitcher is in-
stalled.
2
Note
The staple and hole-punch position changes according to the binding
position specified from “Binding Position”.
The number of punch holes that can be selected may vary depending on
the punch kit that is installed.
The fold function cannot be specified when the staple, punch, or fold &
staple function is specified.
The center staple function and the thick paper function cannot be spec-
ified when finisher FS-608 is installed.