Network printing from a windows operating system, Network printing in a netware environment – Konica Minolta bizhub C451 User Manual

Page 78

Advertising
background image

Setting up network printing

3

C451

3-3

Network connection methods that can be selected in each Windows op-
erating system

This chapter describes the settings that must be specified for network print-
ing.

Setting procedures differ depending on the method of networking printing
used (SMB, LPR, or IPP printing). Select the best method of network printing
for your Windows environment.

Network printing from a Windows operating system

2

Reminder

Before setting up network printing, install the printer driver. For details on
installing the printer driver, refer to “Installing the printer driver” on
page 2-1.

To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary.
For an IPP connection, it is necessary to install the printer driver first.

Network printing in a NetWare environment

Protocol
used

Windows
2000

Windows
XP/Vista

Windows NT
4.0

Windows
Server 2003

SMB printing

TCP/IP, Net-
BEUI

o

o

o

LPR printing

TCP/IP

o

o

o

o

IPP printing

TCP/IP

o

o

o

Port 9100
printing

TCP/IP

o

o

o

NetWare version

Protocol used

Emulation

Service mode

NetWare 4.x

IPX

NDS/Bindery

PServer/Nprinter

NetWare 5.x/6

IPX

NDS

PServer

TCP/IP

NDPS (lpr)

Advertising