Konica Minolta MAGICOLOR 4695MF - Manual (Page 87)

PS/PCL PRINT Menu 73
TRAY
MAPPING
TRAY MAPPING
MD.
Setting
ON / OFF
Select whether or not the Tray Mapping
function is used.
LOGICAL TRAY
0-9
Setting
PHYSICAL TRAY1 /
PHYSICAL TRAY2 /
PHYSICAL TRAY3
Select the tray that is used for printing
when a print job is received from
another manufacturer's printer driver.
The default settings are PHYSICAL
TRAY1 for LOGICAL TRAY1 and
PHYSICAL TRAY2 for other trays.
"
PHYSICAL TRAY3 appears
only if an optional lower feeder
unit is installed.
DUPLEX
Setting
OFF / LONG EDGE /
SHORT EDGE
If LONG EDGE is selected, the pages
will be printed on both sides of the
paper for long-edge binding.
If SHORT EDGE is selected, the pages
will be printed on both sides of the
paper for short-edge binding.
The setting specified in the printer driver
will override this menu setting.
COPIES
Setting
1 to 9999 (Default: 1 )
Specify the number of copies to be
printed.
The setting specified in the printer driver
will override this menu setting.
COLLATE
Setting
ON / OFF
Select whether or not to enable collated
(sort) printing.
The setting specified in the printer driver
will override this menu setting.