Konica Minolta MAGICOLOR 4695MF - Manual (Page 202)

Scanning With the Machine 188
7
Use the keypad to type in the e-mail address, and then press the Select
key.
The settings are registered, and the DIAL REGISTER menu appears
again.
"
A maximum of 64 characters can be entered.
Registering Speed Dial Destinations (LDAP Search)
E-mail addresses can be registered as speed dial destinations by using infor-
mation on the LDAP server. A maximum of 250 speed dial destinations can
be registered.
"
To connect to an LDAP server, settings for LDAP SETTING must be
specified. For details, refer to the Reference Guide on the Documenta-
tion CD/DVD.
"
Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be
registered with Local Setup Utility (LSU) or PageScope Web Connec-
tion. For details, refer to the Reference Guide on the Documentation
CD/DVD.
"
Speed dial destination numbers 221 to 250 are reserved for register-
ing FTP addresses and SMB address from Local Setup Utility (LSU)
or PageScope Web Connection.
1
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY , and then press the Select key.
2
Press the + or , key to select
DIAL REGISTER
, and then press the
Select key.
3
Press the + or , key to select SPEED DIAL , and then press the Select
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination, and then press the Select key.
5
Press the + or , key to select LDAP SEARCH , and then press the
Select key.
"
If an LDAP server is not specified, LDAP SEARCH does not
appear.