Konica Minolta bizhub C200 - Manual (Page 31)

x-30 C200
Power cord
WARNING
• Use only the power cord supplied in the package. If a power cord is not supplied,
only use the power cord and plug that is specified in POWER CORD INSTRUC-
TION. Failure to use this cord could result in a fire or electrical shock.
• Use the power cord supplied in the package only for this machine and NEVER use
it for any other product. Failure to observe this precaution could result in a fire or
electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or dam-
age the power cord. Use of a damaged power cord (exposed core wire, broken
wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your authorized service
representative.
Power source
WARNING
• Use only the specified power source voltage. Failure to do that could result in a fire
or electrical shock.
• Connect power plug directly into wall outlet having the same configuration as the
plug. Use of an adapter leads to the product connecting to inadequate power sup-
ply (voltage, current capacity, grounding), and may result in fire or shock. If proper
wall outlet is not available, the customer shall ask qualified electrician for the in-
stallation.
• Do not use a multiple outlet adapter nor an extension cord in principle. Use of an
adapter or an extension cord could cause a fire or electrical shock.
Contact your authorized service representative if an extension cord is required.
• Consult your authorized service representative before connecting other equipment
on the same wall outlet. Overload could result in a fire.
CAUTION
• The outlet must be near the equipment and easily accessible. Otherwise you can
not pull out the power plug when an emergency occurs.