Akai LCT3226 - Manual (Page 22)

21
6.5 OSD Option Adjustment
Learning about the menu system
After you have installed the batteries and programmed the remote control, you
will need to set some preferences on the TV using the menu system. You can
access the menu using the buttons on your TV or remote control.
The OSD menu displayed in the following sequence (circular display):
Video Audio Misc TV Geometric
(Continued on next page)
To change the PIP picture size:
Press PIP SIZE button to select the PIP
picture size, such as: Small, Middle, Large.
To change the PIP position:
Press PIP POS button to change the PIP
window position under PIP mode, it display
as following;
Right Down → Left Down → Left Up →
Right Up → Right Down
Left Up
Left Down Right Down
Right Up
To change Main or Sub sound:
When the red frame is displaying in main
window, the sound goes out of main window
source. If it display in sub window, the sound
goes out of sub window source.
To display a picture from an external source in the POP window:
1. Connect the external source equipment. (refer to Connect Accessory Devices page).
2. Select the TV program you want to watch in the main window.
3. Press PIP to display the POP window.
4. Repeatedly press SOURCE to select the input source for the POP window.
Switching the pictures:
When in Basic PIP mode, press “ ENTER” to
swap main or sub pictures; When in LR POP
mode, press “ ENTER” swap the L/R pictures.
PIP POS
PIP SIZE
ENTER