Konica Minolta BIZHUB C30P - Manual (Page 15)

3 Printer Agent Configuration
8
2. Select “Printer Agent List” from the column at the right, and then click
the [New] button to create the Printer Agent.
The Create Printer Agent dialog appears. (This dialog is the same as
that displayed when creating a Controlled Access Printer, as
described below.)
3. Enter the Printer Agent name (e.g., KonicaMinolta_PA1) in the
“Printer Agent (PA) Name” box.
4. From the list, according to the syntax
“NDPS_Manager_Name.Context_Name”, select the NDPS manager
started up from the server console.
5. Select “KONICA MINOLTA NDPS Gateway (IP)” in the “Gateway
Types” box, and then click the [OK] button.
To configure the Printer Agent, continue with the instructions in section
3.2.