Konica Minolta BIZHUB C30P - Manual (Page 20)

3 Printer Agent Configuration
13
3.3 Manually Adding a Device
Click the [Add Device] button to add other devices that cannot be or have
not been automatically detected by the configuration utility. This is useful
when you have defined a small network coverage for device detection (e.g.,
hop count = 0), but you want to configure a distant device.
1. Click the [Add Device] button in the KONICA MINOLTA PageScope
NDPS Gateway dialog.
The Add Device dialog appears.
2. Enter the IP address, and then click the [OK] button.
A supported KONICA MINOLTA device is added.
Whether the device for that IP address exists or not is checked. If that device
exists on the network and if it can be confirmed that the device is a
supported KONICA MINOLTA device, that device is added to the list of
detected devices in the KONICA MINOLTA PageScope NDPS Gateway
dialog.