Konica Minolta BIZHUB C30P - Manual (Page 21)

3 Printer Agent Configuration
14
3.4 Device Detection Settings
After clicking the [Advanced] button, various settings can be made to
specify the location in which devices are detected.
On the “Default Setting” tab of the Advanced dialog, you can change the
following two settings:
• SNMP Community Setting:
You can select a different read community (usually specified as
“public”), which is used for communicating with
KONICA MINOLTA printing devices.
• IP Discovery Setting:
You can define the maximum hop count (number of routers passed
through) when detecting devices automatically. The default value is
0, and users are allowed to enter a hop count between 0 and 10.
However, for cases when devices are to be located with a hop count
above 10 and for better performance during detection, users can add
an additional subnet in which devices are detected, as described
below.