Konica Minolta bizhub C31P - Manual (Page 105)

APPENDIX 4
PageScope Data Administrator 4-5
Device of non-SSL com-
munication is detected.
Continue? (If you want to
activate SSL, visit Page-
Scope Web Connection
and activate the SSL set-
tings of ‘bizhub IS
OpenAPI’.) With non-SSL transmission, data is transmitted across the network
in a non-encrypted form. It is recommended that you enable SSL for
devices in PSWC (PageScope Web Connection), and then configure.
Required field error Required input fields are missing. Ensure you input all required
fields.
Error: Input length over The input text string exceeds permissible lengths. Input a text string
that does not exceed these limits.
Error: unavailable char-
acter is used Characters that can not be used have been used. Input characters
that are permitted.
Error: the numerical val-
ue is not set Input numerical values.
Error: range over Input numerical values within the range.
The object is not chosen Select a device from the list.
Duplicate device IP ad-
dresses exist The same device is already in the list. The same device can not be
displayed in the list.
Timeout error Timeout error. Check the network connection, and that the device is
switched on.
There is a possibility that
the SNMP read commu-
nity name is changed.
Please input a correct
community name. This is displayed if the SNMP read community name has been
changed. Input a correct SNMP community name for the device.
It is not able to be started
up because the neces-
sary DLL is not able to be
loaded Check that the application is correctly installed. Additionally, check
that the supported plug-ins on the device that is being used to carry
out settings are correctly installed.
There is no external ap-
plication In order to start HDD Backup Utility and other network tools, these
tools need to be installed. Install these tools, and try again.
Fail to change IP ad-
dress. Try again, or configure using the device operations panel.
Model is different To register a device in “Register from IP address”, ensure that the
device model is correct. In this case, delete the device from device
registration, and carry out registration again.
Unknown error An unknown error has occurred. Close the application, then recon-
figure settings.
Since “Password Rule”
of a device's administra-
tor settings is “ON”,
please set up the pass-
word of eight or more
characters. Moreover, it
cannot set to the pass-
word of only the same
character. When password rules are turned ON in device administration set-
tings, then passwords that have under 8 characters, or that have all
the same characters may not be used. To use passwords such as
these, ensure that password regulations are turned OFF.
Message Details of Error